View UPD5710TK_5491.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
NEC's WIDE BAND UPD5710TK SINGLE CONTROL CMOS SPDT SWITCH
FEATURES
* SUPPLY VOLTAGE : 1.8 to 3.3 V (2.8 V TYP.) SINGLE SWITCH CONTROL VOLTAGE: Vcont (H) = 1.8 to 3.3 V (2.8 V TYP.) Vcont (L) = -0.2 to +0.2 V (0 V TYP.) LOW INSERTION LOSS: 0.6 dB TYP. @ DC to 1.0 GHz 0.8 dB TYP. @ 1.0 to 2.0 GHz 0.95 dB TYP. @ 2.0 to 2.5 GHz
DESCRIPTION
NEC's UPD5710TK is a wide-band single control CMOS MMIC SPDT (Single Pole Double Throw) switch for mobile communications, instrumentation, short range wireless, and general-purpose RF switching applications. This device can operate from DC to 2.5GHz with low insertion loss and high isolation, and generally does not require blocking capacitors on the RF lines. The UPD5710TK is housed in a Pb-Free 6-pin minimold (1511) package, suitable for high-density surface mounting.
*
*
* HIGH ISOLATION: 32.5 dB TYP. @ DC to 1.0 GHz 25 dB TYP. @ 1.0 to 2.0 GHz 22.5 dB TYP. @ 2.0 to 2.5 GHz * POWER HANDLING: Pin (0.1 dB) = +17.0 dBm TYP. @ 1.0GHz, VDD = 2.8 V Pin (1 dB) = +21.0 dBm TYP. @ 1.0 GHz, VDD = 2.8 V * HIGH-DENSITY SURFACE MOUNT PACKAGE: 6-pin minimold package (1.5 x 1.1 x 0.55 mm) * Pb-FREE
APPLICATIONS
* * * * MOBILE COMMUNICATIONS SET TOP BOXES SHORT RANGE WIRELESS INSTRUMENTATION
ORDERING INFORMATION
PART NUMBER PD5710TK-E2-A PACKAGE 6-pinlead-less minimold (1511) MARKING C3L SUPPLYING FORM * Embossed tape 8 mm wide * Pin 1, 6 face the perforation side of the tape * Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: UPD5710TK
California Eastern Laboratories
UPD5710TK PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
PIN NO. 1 2 3 4 5 6 PIN NAME OUTPUT1 GND OUTPUT2 Vcont INPUT VDD
TRUTH TABLE
VCONT Low High INPUT-OUTPUT1 OFF ON INPUT-OUTPUT2 ON OFF
ABSOLUTE MAXIMUM RATINGS (TA =+25C, unless otherwise specified)
PARAMETER Supply Voltage Switch Control Voltage Continuous Current Input Power Operating Ambient Temperature Storage Temperature SYMBOL VDD Vcont Idc Pin TA Tstg RATINGS +4.6 +4.6 60 +27 -45 to +85 -65 to +150 UNIT V V mA dBm C C
RECOMMENDED OPERATING RANGE (TA =+25C, unless otherwise specified)
PARAMETER Supply Voltage Switch Control Voltage (H) Switch Control Voltage (L) SYMBOL VDD Vcont (H) Vcont (L) MIN. +1.8 +1.8 -0.2 TYP. +2.8 +2.8 0 MAX. +3.3 +3.3 +0.2 UNIT V V V
Notes 1. | Vcont(H) - Vcont(L) | 0.1 V
UPD5710TK
ELECTRICAL CHARACTERISTICS (TA = +25C, VDD = 2.8V, Vcont(H) = 2.8 V , Vcont(L) = 0 V, unless otherwise specified)
PARAMETER Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Isolation 1 Isolation 2 Isolation 3 Input Return Loss Output Return Loss 0.1 dB Loss Compression Input Power Note 1 dB Loss Compression Input Power Note Intermodulation Intercept Point Supply Current Switch Control Current Switch Control Speed SYMBOL Lins1 Lins2 Lins3 ISL1 ISL2 ISL3 RLin RLout Pin (0.1 dB) Pin (1 dB) IIP3 IDD Icont tSW TEST CONDITIONS f = DC to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = DC to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = DC to 2.5 GHz f = DC to 2.5 GHz f = 1.0 GHz f = 1.0 GHz 2 tone, 1.000/1.001GHz, 1 MHz spacing No RF No RF MIN. - - - 30 22 15 15 +13.5 - - - - TYP. 0.6 0.8 0.95 32.5 25 22.5 20 20 +17.0 +21.0 +33 0.01 0.01 30 MAX. 0.8 1.0 1.2 - - - - - - - - 1.0 1.0 500 UNIT dB dB dB dB dB dB dB dB dBm dBm dBm A A ns
Notes .
Pin (0.1 dB) or Pin (1 dB) are the measured input power level when the insertion loss increases 0.1 dB more or 1dB than that of linear range.
UPD5710TK EVALUATION CIRCUIT
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
UPD5710TK ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
USING THE NEC EVALUATION BOARD
SYMBOL C1, C2 VALUES 1,000 pF
UPD5710TK TYPICAL CHARACTERISTIC
(TA = +25C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
UPD5710TK TYPICAL CHARACTERISTIC
(TA = +25C, VDD = 2.8 V, Vcont (H) = 2.8 V, Vcont (L) = 0 V, unless otherwise specified)
Remark The graphs indicate nominal characteristics.
UPD5710TK PACKAGE DIMENSIONS 6-PIN LEAD-LESS MINIMOLD (1511) (UNIT:mm)
UPD5710TK RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow Soldering Conditions Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220C or higher Preheating time at 120 to 180C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (package surface temperature) Time at temperature of 200C or higher Preheating time at 120 to 150C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (molten solder temperature) Time at peak temperature Preheating temperature (package surface temperature) Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Peak temperature (pin temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260C or below : 10 seconds or less : 60 seconds or less : 12030 seconds : 3 times : 0.2%(Wt.) or below : 215C or below : 25 to 40 seconds : 30 to 60 seconds : 3 times : 0.2%(Wt.) or below : 260C or below : 10 seconds or less : 120C or below : 1 time : 0.2%(Wt.) or below : 350C or below : 3 seconds or less : 0.2%(Wt.) or below Condition Symbol IR260
VPS
VP215
Wave Soldering
WS260
Partial Heating
HS350
Caution
Do not use different soldering methods together (except for partial heating).
07/29/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.

▲Up To Search▲

Price & Availability of UPD5710TK

	To Download UPD5710TK Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .